Accessories

 
DCC Accessories - Wiring Aids
Part No. Description   Price  

810012

Two-Pin Micro Connectors

These 2-pin Microconnectors allow locomotive wiring to be quickly disconnected for easier painting and servicing.

 

810036

Insulative Tubing

This contains 24" of 24awg insulative tubing for covering exposed component leads and wires.

 

810037

Shrink Tube Kit

The Shrink Tube Assortment provides 6" each of 1/16", 3/32". 1/8" and 1/4" diameter tubing, perfect for insulating your solder connections. 

 

810058

Mini Micro Connectors

These tiny connectors are useful between the locomotive and tender for easy disconnect. Package of ten - .025" diameter pins and mating receptacles.

 
810038 Exhaust Cam Kit The Exhaust Cam Kit is for use with all SoundTraxx Steam Digital Sound Decoders with a cam output.
 
810068 DSD-150/TSU-1000 Steam Speaker Harness Ultra-flexible replacement speaker wire harness for Steam and Diesel DSD-150 and TSU-1000 Steam decoders.  

Special Order Only

810069 DSD-150/TSU-1000 Power Harness Ultra-flexible replacement power wire harness for Steam and Diesel DSD-150 and TSU-1000 Steam decoders.   Special Order Only
810091 DSD-150 Diesel Speaker Harness Ultra-flexible replacement speaker wire harness for DSD-150 diesel decoders.   Special Order Only
810097 DSD-100LC Wire Harness Replacement wire harness for all DSD-100LC Digital Sound Decoders.   Special Order Only
810092 DSX Steam Harness Ultra-flexible replacement wire harness for DSX Steam decoders.   Special Order Only
810093 DSX Diesel Harness Ultra-flexible replacement wire harness for DSX Diesel decoders.   Special Order Only
810123 NMRA 8-pin Connector Set This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.
 
810140 Current Keeper This 40mm x 6mm x 11mm DCC Accessory maintains power to the decoder for up to 10 seconds during electrical interruptions. Here
DCC Accessories - Speakers
         
810083 3/8" dia Speaker These tiny high output speakers measure just 0.375" in diameter, will fit in N-scale or can be used as an additional speaker mounted in a smokestack or under a fan grille.
 
810089 1/2" dia Speaker These tiny high output speakers measure just 0.50" in diameter and are suitable for N-Scale and larger models.
 
810053 3/4" dia Speaker These tiny high output speakers measure just 0 .75" in diameter and are suitable for N-Scale and larger models. 
 
810054 1" dia Speaker These high output speakers measure 1.00" in diameter and are suitable for HO and larger models. One of our favourites!
 
810055 1 1/2" dia Speaker

 

  Special Order Only
810056 2" dia Speaker     Special Order Only
810087 2 1/2" dia Speaker     Special Order Only
810057 3" dia Speaker     Special Order Only
810059 4" dia Speaker     Special Order Only

810078

Oval Speaker

Our oval speakers measure 1.10" x 1.57" x 0.50" deep and are rated for 1 watt. Great sound if you fit this one!

 

810084 Oval Speaker This Speaker measures 1.5" x 2.5"
 
810090 Oval Speaker     Special Order Only
810103 Oval Speaker This oval speaker is a great speaker for many HO diesel locomotives. It measures 1.56" x 0.78" x 0.31". This speaker is best for HO and S Scale locomotives.
 
810112 Oval Speaker This small 1 watt oval speaker is a tiny 0.56" wide, 1.00" long and just 0.19" deep (14mmx25mmx5.2mm). It is perfect for narrow hood diesels and anywhere else where space is at a premium!
 
810113 Oval Speaker This small 1 watt oval speaker is just 0.63" wide, 1.38" long and just 0.28" deep (16mmx35mmx8mm). It is perfect for narrow hood diesels and has a better low frequency response than the smaller oval speaker mentioned above.
 
DCC Accessories - Miscellaneous
         
810099 Speaker Baffle To Suit Lifelike E series units   Special Order Only
810100 Speaker Baffle To suit Lifekike PA/FA units   Special Order Only
810101 Speaker Baffle To suit Stewart C628/630 models   Special Order Only
810102 Speaker Baffle To suit Bachmann HO Shay   Special Order Only
810107 3/8" Baffle Kit This snap-together baffle kit is designed for use with our 3/8" diameter speaker. 
 
810108 1/2" Baffle Kit This snap-together baffle kit is designed for use with our 1/2" diameter speaker.
 
810109 3/4" Baffle Kit This snap-together baffle kit is designed for use with our 3/4" diameter speaker.
 
810110 1" Baffle Kit This snap-together baffle kit is designed for use with our 1" diameter speaker.
 
810118 3/4" dia gasket This is a pack of self adhesive gaskets for sticking the speakers down to your loco    
810119 1" dia gasket      
810120 20 x 40mm gasket      
810121 14 x 25mm gasket      
810122 Speaker Baffle To suit Bachmann decapod   Special Order Only
829001 Decoder Test Kit     Special Order Only