Home
 

.

£150

Yes, that’s right a full spec’d DCC system with access to all functions for loco and sound operation for  £140.

Also this is the easiest to use DCC system I have come across and, when you want to expand, this bit fits in perfectly and doesn’t become obsolete

 


Seriously, I played with this system whilst in Durango at the Narrow Gauge Convention having made the challenge “why should I buy this one” and without instruction was selecting and running engines and then easily programming loco’s. I was so impressed they whilst I didn’t buy the company I did sign up as a dealer there and then.

The starter sets from other manufactures all come with a limited specifications which in an era of sound fitted loco’s usually has you buying upgrades straight away and, often, it leaves the kit you have already without a job on your layout.

This one does all that the other systems in the range do, you can run loco’s, use all the sound functions and program locos. Unlike the other systems its display uses English instead of codes and it guides you through each program.

So what is the catch?

Of course it has some limitations. If a starter set did everything they'd never sell the full monty systems would they?

  1. Its power supply is a plug top one like a mobile phone charger and is limited to 1.8 amps which in our scale means 2 or 3 loco's running at the same time. This is fine for most impoverished narrow gauge lines but it upgrades easily should your railroad hit pay dirt

  2. The handset has to remain plugged in. You can always add a second if you want to go walkabout beyond the length of the flex

  3. It turns your whole layout into the programming track instead of having a dedicated programming track output. Worst case is that you try to alter the programming in one loco but change all of those on the line. There is a safe way round this, look at the AutoSW below


We've don't keep all the NCE range but will be adding more of their items over time. Meanwhile we can get any of their items you want with one exception. The full range and the manuals can be accessed through their website

NCE Website

The only items we can't supply are the radio throttles and base station as they are not licensed for use at UK approved radio frequencies.
Home  
 
NCE Set

£150

Sorry_ Out of Stock

NCE PowerCAB Set

Yes, that’s right a full spec’d DCC system with access to all functions for loco and sound operation for that price.

Also this is the easiest to use DCC system I have come across and, when you want to expand, this bit fits in perfectly and doesn’t become obsolete.

 

Now comes with a UK style plug, no adaptor is required


 
£17.50

AutoSW
The Auto-SW adds a separate program track to your Power Cab system. Prevents accidental programming of ALL locos on your track when using Program Track mode. Automatically disconnects your main line when in Program Track mode (does not affect Program on Main). Compatible with ALL DCC systems such as DigitraxTM Big Boy, Empire Builder and Bachmann EZ-CommandTM.

 
Switch Kat £17.50

Switch Kat
Your Kato UnitrackTM and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch position indicator lights and "local control" pushbuttons. Simple installation, two wires to the track, two wires to the switch

 
Switch Kat £ Snap It
Control one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control" pushbuttons. You can control switches from your cabs and your control panels

 
Switch It £14.00

Switch It
Control two SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. The Switch-It provides connections for "local control" pushbuttons. Control switches from your cabs and your control panels. TortoiseTM is a registered trademark of Circuitron, Inc.

 
Switch 8   Switch 8
Control eight SwitchMasterTM, TortoiseTM or similar stall motor switch machines. Switch-It remembers the position of your switches during power outages. Each output of the decoder can have a completely different accessory address. TortoiseTM is a registered trademark of Circuitron, Inc.

 
PCP £15.50

PCP
Add a separate PCP panel to operate your Power Cab in other places or on other layouts

SB3a £ SB3a
Need More power on your layout. Add a Smart Booster 3a (you will also need to add a Transformer) and your system is transformed into a 5A system. In addition this "brains" transfer to the SB3a from the handset and you can unplug and wander with it. Further boosters can be added to add more 5A zones.

 
Usb Interface £36

Sold Out

USB Interface
Add this USB computer interface for computer programming and/or operation of your Power Cab equipped layout.