Home

MOUNT BLUE MODEL CO.

0n30 / 0n2 Rolling Stock Kits

   

Return to Mount Blue Index

 
Pulpwood Racks

for the Bachmann On30 Flatcar

Flatcar not included.

Based on the cars built by the Sandy River Railroad around 1900.

Easy to assemble kit features laser-cut wood parts, brass wire, plastic nut/bolt detail, laser-cut precise assembly jigs for rack assembly and deck hole drilling, b&w and full colour photos.

Parts included to do either early or later strengthened version.   

Kit # 1  £9.50

 

Replacement Racks

for the Bachmann On30 railtruck

Railtruck not included.

Replace those plastic racks with a set of real wood ones.   

Easy to build kit includes laser-cut stakes, pre-cut slats, plastic details, and full size assembly templates.

Kit # 3  £4.70

 

Wood Bay Window Caboose Body
for the Bachmann on30 caboose chassis. Easy to build. 2 versions available. Laser-cut plywood with peal and stick parts, and illustrated instructions.

Caboose chassis not included.

Kit #5c  £20.90 curved roof

Kit #5d  £20.90 Peaked Roof
 
SR&RL TYPE  CABOOSE BODY
Based on the SR&RL RR's caboose #551.Fits on  the Bachmann On30 passenger car chassis.

Laser-cut plywood with peal and stick parts, strip wood, milled wood corners, brass wire. peal and stick roofing.    Passenger car chassis not included.

Includes jigs for handrail bending and ladder assembly. Fully illustrated instructions.

Kit # 6  £30.00

 

INTERIOR for the SR&RL TYPE CABOOSE

Based on the interior of the SR&RL's caboose # 551.

Parts shown in green are supplied in caboose kit.

 

Laser-cut plywood and basswood with peal and stick window trim and interior doors. Also includes door guard planks for wall opposite cupola box.

Includes optional seat, plastic hinge detail, and new full glazing sheet for the doors. Slides right into the caboose body. 

Kit # 6a  £12.50

 

Return to Mount Blue Index

RGS Railtruck Freight Body

for the Bachmann On30 railtruck

Railtruck not included.

When the US Postal Service got a look at the RGS's open railtruck, they threatened to revoke the mail contract. The mail had to be carried in a secure location. This is what the RGS came up with.

Easy to build.  Laser-cut wood with plastic details, and peel and stick roofing.  Removable, fits into stake pockets. Cab window frames included.  

Kit # 2  £19.00

Wood Caboose Body with Curved Roof

for the Bachmann On30 caboose chassis.

Caboose chassis not included.

Kit will build either version shown.    

Laser-cut plywood with peel and stick parts, and illustrated instructions.

Kit # 5a  £28.80

Wood Caboose Body with Peaked Roof

for the Bachmann on30 caboose chassis.

Caboose chassis not included.

Kit will build either version shown.    

Laser-cut plywood with peel and stick parts, and illustrated instructions

Kit # 5b  £28.80

Wood Caboose Body with round roof
Wood Caboose Body with round roof. for the Bachmann on30 caboose chassis. Easy to build This is a slightly longer, 1/2" longer, version on our #5-a caboose kit. Kit includes new floor and parts to lengthen the Bachmann caboose chassis.

 

Kit #5e  £25.80 with side door

Kit #5f  £25.80 no door centre cupola

 

WW&F Rly. #7 CAB KIT
Later type open back cab fits on the On30 2-4-4t Forney.

Laser-cut plywood and basswood with peal and stick front plate, plastic carriage bolt head detail, plastic glazing, interior wall and side window detail. Three position roof hatch.  Easy to build.

Kit # 7  £14.80

DROVERS CABOOSE  KIT

Based on SR&RL caboose #553. 

 

Designed to fit on the Bachmann passenger car chassis.

Laser-cut plywood and basswood with peal and stick parts. Also includes peal and stick roofing, bass strip wood, and brass wire. 

Easy to assemble. 

Kit 8  £30.00

INTERIOR FOR THE DROVERS CABOOSE

Based on the interior of SR&RL's #553 caboose.

Same construction as our kit # 6-a. Slips into completed body.

 East to build. 

Kit 8a   £12.50

  SR&RL RR CABOOSE # 556- 558                        for On2 / On30
 

These 3 almost identical cars were built by the Maine Central RR in 1913.  Two of the cars survived the RR.

This is our 1st correct size caboose kit, no compromises in size here.  Measured from the original 556 in Phillips, Maine.  Complete with full interior. Details match the prototype.

These kits consist of laser-cut plywood and basswood with peal and stick parts.  Kits also contain plastic details including stove and brake cylinder/reservoir, brass handrails and ladders, scale looking draft gear.

Trucks and couplers not included.  Will require Kadee #26 couplers and On2 or On30 trucks of your choice.

Kit #9  £68

SR&RL #556

Longitudinal flooring, long platform supports, 3 panel doors.

Kit #10  £68

SR&RL #557 + 558 

Diagonal flooring, short platform supports, 2 panel doors

 

 
EXCURSION CAR BODY KIT

For the Bachmann Passenger car chassis. [Not Supplied]

Easy to build body with interior seats and end windows.   Kit consists of laser-cut plywood, basswood, cardstock roof, and plastic glazing.

Kit 11   £16.50

SANDY RIVER EARLY 24'8BOXCAR

Early Dyer built 24' boxcar with 5' 3" high door opening

Trucks and couplers not included.

Kit consists of laser-cut 2 sided sides and ends, 'metal' roof with etched panel lines, interior framing details, sliding side doors (choice of 3 styles) with cast brass hardware, semi-scale draft gear which accepts #26 or McHenry #14 couplers (not included), plastic details, and brass wire. 

Kit 13   £31.00

SANDY RIVER RAILROAD WORK CABOOSE

24' caboose converted from a boxcar.

Trucks and couplers not included.

Kit is derived from 3 photos and known boxcar dimensions. Kit consists of laser-cut 2 sided sides and ends, 'metal' roof with etched panel lines, interior framing details, sliding side doors with cast brass hardware, semi-scale draft gear which accepts #26 or McHenry #14 couplers (not included), plastic details, and brass wire.

Kit 12   £34.00

SANDY RIVER EARLY 24' BOXCAR

No interior details-non opening door.

Early Dyer built 24' boxcar with 5' 3" high door opening.

Trucks and couplers not included.

Kit consists of laser-cut plywood sides and ends, 'metal' roof with etched panel lines, choice of 3 styles of side doors with cast brass hardware, semi-scale draft gear which accepts #26 or McHenry #14 couplers (not included), plastic details, and brass wire.

Kit 13a   £28.60

  Return to Mount Blue Index
WOOD CAB with Round Roof for the Bachmann 4-4-0
Laser-cut plywood and basswood with peal and stick front plate, plastic carriage bolt head detail, plastic glazing, interior wall and side window detail. Three position roof hatch. Easy to build.

(Photo shows our #706 pilot, not included in cab kit, see Detail Parts page for pilot kits.)

Kit 14   £14.50

WOOD CAB  taller with Round Roof 

for the Bachmann 4-4-0

Same as our #14 cab kit but 1/4" (scale 1 foot) taller to better match the Bachmann passenger car roof line.

Kit 14b  £14.50

 
WOOD CAB with Peaked Roof for the Bachmann 4-4-0
Laser-cut plywood and basswood with peal and stick front plate, plastic carriage bolt head detail, plastic glazing, interior wall and side window detail. Easy to build.

(Photo shows our #706 pilot, not included in cab kit, see Detail Parts page for pilot kits.)

Kit 14a   £14.50

 

   

Freelance RAILBUS BODY

for the Bachmann On30 Railtruck

Railtruck not included.

Laser-cut wood, chipboard roof, peal and stick trim and roofing, plastic details and glazing. Includes seats. Rear wall has 2 full-height freight doors. Easy to assembly, but does require some disassembly of the railtruck to remove the cab, explained with photo in the illustrated instructions. 

Kit 15   £21.00

SOLD OUT

Passenger only version w/ 4 windows each side, plain rear wall (no freight doors).

Kit 15a   £21.00

SANDY RIVER & RANGELEY LAKES 28' BOXCAR
This kit builds the #87-94, and #96-99 series cars. These were low roof cars with 4 rung ladders. Full detail inside and out. 2-side etched scale thickness sides, one piece roof walk/ platforms, correct size airbrake castings, semi-scale draft gear (uses #26 couplers), working doors, and pre-bent handrails. Also includes plastic and brass detail parts, brass wire, white metal air hoses and retainer castings.

Requires trucks and #26 couplers and paint to complete.

Kit 17  £41.00

 

 
SANDY RIVER & RANGELEY LAKES  Toolcar  #562
Full detail inside and out. 2-side etched scale thickness sides, one piece roof walk/ platforms, correct size airbrake castings, semi-scale draft gear (uses #26 couplers), working doors, and pre-bent handrails. Also includes plastic and brass detail parts, brass wire, white metal air hoses and retainer castings.

Includes decals as shown (can also de done as #55). Requires trucks and #26 couplers and paint to complete. This kit was measured from the original car located at the SR&RL RR in Phillips ,Maine and includes the 2" sag the car had in 1935 photos and still has today.

Kit 16  £52.50

On30 Freelance Centre Cab Diesel body.

Fits on the Showcase Line S scale SW9 chassis.

Kit consists of plywood sub structure which is covered with peel and stick lazerboard. Includes short and tall radiator ends, extra doors, and laser-cut glazing. Slides right onto the SW9 chassis.

SW9 locomotive drive and detail parts not included. SW9 wheelsets will need to be narrowed to On30. Please see the Yahoo on30 groups for details.

Kit 19  £24.00

To Order Only - because of the difficulty in obtaining the chassis in the UK we only get this kit in to order
     
 
SANDY RIVER & RANGELEY LAKES 28' FLATCARS

28 foot flatcar with 6 stake pockets and 2 trussrods. Laser-cut basswood deck and sills.

Plastic detail parts including correct size air cylinder/reservoir. Semi-scale draft gear requires #5 couplers.

Requires trucks, #5 couplers, decals, and paint to complete.

Kit 20  £32.50

 

SANDY RIVER & RANGELEY LAKES 28' FLATCARS

28 foot flatcar with 6 stake pockets and 4 trussrods. Laser-cut basswood deck and sills.

Plastic detail parts including correct size air cylinder/reservoir. Semi-scale draft gear requires #5 couplers.

Requires trucks, #5 couplers, decals, and paint to complete.

Kit 20a £32.50

 

  Return to Mount Blue Index