Up a Level

 EDM Header

 

Detail Castings from EDM Models

 

These are castings, usually from our range of loco kits, that are available separately. With the recent release of new kits we expect this range will increase significantly in the near future

 

A115

Dome

 

Manning Wardle  L&B 2-6-2

3.70

A119

Chopper Coupling  [pair]

[hooks not provided]

 

Manning Wardle  L&B 2-6-2

4.20

A120

Chimney

 

Manning Wardle  L&B 2-6-2

3.50

A124

Brake Screw

 

Manning Wardle  L&B 2-6-2

3.50

A125

Vacuum Pipe  [pair]

 

Manning Wardle  L&B 2-6-2

3.20

A127

Steam Heat Pipes  [pair]

 

Manning Wardle  L&B 2-6-2

3.20

 

A128

Coupling Pocket  [pair]

 

Manning Wardle  L&B 2-6-2

3.20

 

A144

Regulator

 

Manning Wardle  L&B 2-6-2

3.00

 

A152

Short Safety Valve

 

Manning Wardle  L&B 2-6-2

3.50

A154

Gauge Glasses

 

Manning Wardle  L&B 2-6-2

3.50

A159

Reversing Lever

 

Manning Wardle  L&B 2-6-2

3.80

A177

Smokebox Door

 

Manning Wardle  L&B 2-6-2

3.90

A460

Tall Safety Valve

 

Manning Wardle  L&B 2-6-2

3.90

     
 

589-52145

Cast Back Head Surround

This is an upgrade part for our Linda Blanche Charles kit to provide the polished brass bezel on the rear of the firebox.

This part is included in the 2013 release of the LBC kits and available as a extra for earlier kits and, possibly, other loco's

Fitting Guide

Hunslet, Linda, Blanche, Charles

5.50

 



EDM Models - Harp Switchstand Kit
Our UK produced version of the classic Harp Switchstand
This simple kit makes up in to a working harp switchstand which has three locking positions and can work a turnout. You lift the arm clear of the notch and move it to the new location.
If your turnouts are motored and you just want the stand to move with them file the catches off the handle and its free to move. You can alter the throw but redrilling the hole at the bottom of the handle to be closer to the pivot.


1:48 scale 0n3 & 0n30 K28 Snow Plows

A box of long forgotten stock has revealed a small number of cast metal detailed plows for D&RGW K28 locos.

These were designed for the MMI K28 Models in 0n3 & 0n30 but very few were fitted to the models when delivered and now they're surplus.

They are a big plow proportioned for a big 3ft gauge loco as seen in the prototype picture to the left. It also shows as being very big against the Bachmann 2-8-0 above which is a 2' 6" gauge prototype.

 

K28 Die Cast Metal Plow

 

 

Brass Castings to suit the Minerva Models Peckett

Brass Dome with inset safety valves

Dome B Brass Dome with Salter Safety Valves

Dome C GWR Style bonnet brass Dome

 

 

Up a Level

fdf    P